Custom cable and component supply for PowerDive’s surface supply diving systems

How Complete Wiring has developed, specified and pre-assembled the cable sets inside PowerDive Australia’s diving systems since 2004.

Customer:

PowerDive Australia

Application:

Custom cable sets and pre-assembled component kits built into a product manufactured by the customer

Operating conditions:

Continuous saltwater exposure and marine service

Capability used:

Design-to-production support, component specification and sourcing, custom cable development, pre-assembly and kitting, 100% unit testing

Relationship:

Supplying since 2004

Manufactured:

Capalaba, Brisbane

What PowerDive needed to solve

PowerDive Australia manufactures surface supply diving systems, lightweight units that let divers work and swim without carrying or filling scuba tanks. The products are made in Australia and sold internationally.

The cable running through that product has a hard job. It is in contact with saltwater for the life of the unit, it carries power and control to equipment a person is relying on underwater, and it has to keep working for years rather than seasons.

There was a second problem, and it was commercial rather than technical. As a product manufacturer, PowerDive would otherwise have had to specify the electrical components itself, buy them in bulk to get sensible pricing, store them, check them and sub-assemble them before its own production team could install them. That is cash, floor space and quality control spent on parts rather than on product.

What Complete Wiring supplied

Complete Wiring has manufactured and supplied the cable solution for PowerDive’s product range since 2004, from our Capalaba facility in Brisbane. The work covers three things: developing the cable, specifying and sourcing the components, and pre-assembling them so they arrive ready to install.

Developing a cable for saltwater

Working with our suppliers, we custom-made a cable able to withstand continuous marine exposure, and specified the connectors, switches and components to go with it, selected for durability in saltwater conditions rather than for general-purpose use.

We also print the PowerDive brand name on the cabling, so the component inside the product carries the customer’s brand rather than ours.

Component specification, sourcing and pre-assembly

Complete Wiring was involved from the development stages of PowerDive’s products, helping determine and source the electrical components used across the range, then pre-assembling those items ready for PowerDive’s manufacturing team to install.

For a product manufacturer, that changes the economics. The bulk buying, the holding stock, the incoming inspection and the sub-assembly time move off the customer’s floor and into ours.

“This business relationship with Complete Wiring saves my company time in manufacturing and quality control. We also no longer have to buy components in bulk, which helps with cash flow and storage.“

— Aaron Hawke, Director, PowerDive Australia

100% unit testing on every cable set

Testing is part of manufacturing at Complete Wiring, not a final look before dispatch. Every production item is individually tested rather than batch sampled.

For a component that goes inside someone else’s product and carries their brand, that matters twice over. A fault does not surface as our problem. It surfaces as a warranty claim, a production stoppage or a reputation issue for the manufacturer who fitted it.

Testing is defined by the approved requirements for the job and may include:

  • Visual inspection
  • Continuity testing
  • Insulation testing
  • Computer-controlled CableEye testing
  • Conformity checks against approved drawings and documentation
  • Customer-specific checks where documented and agreed

Learn more about our quality system, training and testing

Supplying the same product since 2004

A product manufacturer does not want a supplier for one build. It wants the same part, to the same specification, for as long as the product is on the market.

Retained drawings, production information and records support repeat production against the approved requirements, and components can be traced from purchasing and supplier information through the relevant work order into finished production. When a component is discontinued, that documentation is what makes it possible to find a replacement and confirm it against the original requirement rather than starting again.

The result

PowerDive’s products ship with a cable solution developed for the conditions they work in, assembled and individually tested in Brisbane, and delivered ready to install.

“Complete Wiring has worked closely with PowerDive in the development stages of our products to help determine and source the best electrical components to use within our product range, then pre-assembling these items ready for our manufacturing team to install.“

— Aaron Hawke, Director, PowerDive Australia

Building a product with a cable inside it?

If you manufacture equipment and the wiring inside it is a component you would rather not manage, the same approach applies. We provide manufacturability input during development, specify and source components, build and test the assemblies, and supply them as kits ready for your production line.

There is no minimum order value. We support prototypes and small batches, and scale into ongoing repeat supply as a product moves into production.

Read about design to manufacture and cable and wire harness assembly

Frequently asked questions

Yes. We provide manufacturability input during product development, and specify and source electrical components against the requirements for the application. This is part of our design-to-production support.

Yes. We pre-assemble components and supply them ready to install, which removes bulk component buying, storage and sub-assembly time from your own operation.

Yes. Working with our suppliers, we develop custom cables and specify connectors, switches and components against the conditions the product has to work in, including exposure, moisture and continuous immersion.

Yes, where the cable is custom made for your product. Branding is agreed as part of the approved requirements for the job.

Retained drawings, production information and records support repeat production to the approved requirements, and traceability supports finding and confirming replacements when a component is discontinued. We have supplied PowerDive’s cable solution since 2004.

Talk to our team about your project

Send us your drawings, specifications, a sample or an outline of the requirement. We will come back to you with a practical, production-ready response.

SEO pack

• Primary keyword: custom cable manufacturer for OEMs Australia. Secondary: component sourcing and kitting, custom cable for marine environment, cable assembly for product manufacturers, design to production cable support Brisbane. Confirm against the approved keyword map before publication.

• Title tag: Custom Cable & Component Supply for OEMs | Complete Wiring (58 characters).

• Meta description: How Complete Wiring has developed, supplied and pre-assembled the cable sets inside PowerDive Australia’s diving systems since 2004. (133 characters).

• Slug: /projects/powerdive-custom-cable-component-supply/, with a 301 redirect from /case-study-innovative-marine-cabling-for-the-diving-industry/.

• Move the page out of News and into the Projects section, matching the mining and Cell on Wheels project pages.

• Internal links in: Design to Manufacture (as its case study card), About Us, Cable and Wire Harness Assembly, Projects hub, and from the Mining and Agriculture and Automation pages as harsh environment proof.

• Internal links out: Design to Manufacture, Cable and Wire Harness Assembly, Quality and Certification, Contact or Request a Quote. External link to powerdive.com in a new tab, subject to permission.

• Schema: BreadcrumbList for the Projects path, and FAQPage for the visible FAQ section only if the answers remain visible in the page source.

• Images: descriptive file names, for example powerdive-custom-marine-cable-complete-wiring-brisbane.jpg. Credit line: images supplied by PowerDive.

• Moved the page from News to the Projects section, with a 301 redirect from the old URL.